Elcometer 130 Salt Contamination Meter: 

The Elcometer 130 Salt Contamination Meter quickly and accurately measures the level of soluble salts on surfaces.

Features:

 v  Fast reading rate allows multiple tests to be completed efficiently

v  Pressure plate ensures a constant and uniform pressure to paper

v  Automatic detection of paper size and automatic adjustment of reading value

v  USB and Bluetooth® data output to ElcoMaster™ 2.0 software

v  Dust and water resistant rugged design equivalent to IP64

v  Automatic temperature compensation ensures accurate results

v  Non-oxidising gold plated contacts ensures lifetime accuracy

v  Stores up to 150,000 readings in 2,500 alpha numeric batches. 

v  Fully portable hand-held, ergonomic design ideal for use in the field.

Elcometer 134A Chloried lon Test Kit for Abrasives:

Chlorides deposited on a surface by contaminated abrasives during blasting can cause a coating to fail prematurely. 

Contamination can build up, particularly if the blast media is recycled several times. Using the Elcometer 134A Chloride Ion Test in the field will accurately identify contamination and prevent costly surface-related failures. 

Elcometer 148 pH Tester

The Elcometer 148 pH Tester is a simple, easy to use instrument measuring both pH and temperature using a single sensor.

pH is the measure of acidity of a liquid. The pH scale ranges from 0 to 14pH - where 0pH is acidic and 14pH is alkaline.

In many industries, pH measurement is critical to the correct performance of processes. pH is temperature dependent thus the temperature of the sample under test will affect the pH value recorded.

The Elcometer 148 pH Tester sensor has automatic temperature compensation, ensuring like-for-like measurements can be taken for meaningful comparison of the results.

Elcometer 138 Bresle Salt Kit: 

It is essential that the level of contaminants on a surface is measured prior to application of the coating to ensure the quality of the coating and that its optimum lifetime is achieved. 

If the coating is applied to a contaminated surface, which is not properly prepared, it could fail prematurely resulting in costly re-coating and high maintenance costs. The Elcometer 138 Bresle Kit includes the Elcometer 138 Conductivity Meter. This lightweight, portable conductivity meter accurately measures the salinity of the test samples. 

The cartridge type sensor can be easily replaced when necessary and displays conductivity (µS/cm and mS/cm) and salinity (%) on the digital display. 

Features of the meter include indication of stability of reading indication. 

 Elcometer 138 Conductivity Meter: 

 The Elcometer 138 Conductivity Meter features:

v  Highly precise measurements can be obtained from a single drop

v  Automatic range switching gives a wide measurement range of 1μs/cm to 19.9mS/cm

v  Out of range and low battery alarms

v  Visual indication when ambient temperature is outside the operating range

Surface Profile: 

The profile of a surface will affect the coating’s overall performance.

The height of the profile (measured from the peaks to the troughs) determines aspects such as adhesion, coverage and overall volume of coating used.

If the profile is too large the amount of coating required to ensure adequate coverage increases, otherwise there is a danger that the peaks remain uncoated - allowing rust spots to occur. If the profile is too small, there may be an insufficient key to produce adequate adhesion, leading to premature coating failure. Ensuring the correct surface preparation optimizes the performance of the coating and material usage.

Digital Surface Profile Gauge - Elcometer 224 Separate:

   The Elcometer 224 is available in two different models: Model B and Model T. Each gauge provides the user with increasing functionality - from the entry level Elcometer 224 Model B, to the top of the range Elcometer 224 Model T, with memory, alpha-numeric batching and Bluetooth® communication.

Standard and armoured probes are available for the separate models, providing even greater measurement flexibility.  Elcometer surface profile probes are supplied with a glass zero plate, calibration test foils (nominal values 125µm (5.0mils) & 508µm (20mils) and an Elcometer Test Certificate. 

Digital Surface Profile Gauge - Elcometer 224 Integral: 

The Elcometer 224 is available in two different models: Model B and Model T. Each gauge provides the user with increasing functionality - from the entry level Elcometer 224 Model B, to the top of the range Elcometer 224 Model T, with memory, alpha-numeric batching and Bluetooth® communication.

Integral gauges are ideal for single handed operation as the wide footprint of the internal probe provides greater stability during measurement - allowing for consistent, repeatable and accurate results.

Elcometer 123 Surface profile Gauge:

This easy to use gauge measures the peak-to-valley height of a blast cleaned surface.

The average of a series of measurements provides an indication of the surface roughness and allows the surfaces to be compared as blasting proceeds. 

Metric and Imperial versions

Elcometer 223 Surface profile Gauge:

A Digital Surface Profile Gauge which measures the peak-to-valley height of a surface in a similar way to the Elcometer 224.

RS232 output - for direct transfer of readings to a PC, datalogger, miniprinter etc. This provides a permanent record of your test results as there is no memory in the gauge.

Metric and Imperial switchable

Replica/ Testex Tape:

The Elcometer 122 Testex Replica Tape is a very simple technique to measure a surface profile. The foam side of the Testex Tape is used to mould the peak-to-valley profile of the surface and then the measurement is taken by the Elcometer 124, a mechanical Surface Profile and Thickness Gauge.

The Elcometer 124 Thickness gauge has been specifically designed to provide the correct anvil area and measurement force so as not to effect the surface profile reading. The gauge can also be zeroed to offset the original tape window thickness (typically 50µm (2 mils). The Testex Replica Tape is a proof of test, as the tape can be included in manual reports. 

Elcometer 7061 MarSurf PS1 Surface Roughness Tester:

In protective coating applications there is a requirement to measure surface roughness.

Measurements of surface roughness are expressed in terms of Ra, Rz or Tp. These values include peak-to-valley profile measurement in combination with an assessment of the frequency of peaks within the sample area.

The Elcometer 7061 surface roughess tester is a light weight and portable measuring solution for the range of surface roughness measurements required for compliance to International Standards.

The unit is also suitable for assessing surface roughness conditions in a wide range of general industrial applications; particularly where the sample is too large to bring to the laboratory.

Features: 

Ø  Multi-Lingual Display: All the required information is displayed on screen in a choice of 14 languages.

Ø  Flexible: Can be used in virtually any position; horizontally, vertically, upside down. A height adjustment accessory to accommodate various sample sizes is supplied with each gauge as standard.

Ø  Integrated Calibration Standard: No external calibration standard is required; provides greater ease of use.

Ø  Drive Unit: Can be rotated and moved longitudinally; enables the stylus pick-up to be moved to the calibrating position. The stylus pick-up is also protected for transport in this position.

Ø  Stylus pick-up with removable protection: 2µm (80µin) diamond stylus tip with a measuring force of 0.7 mN. Different stylus’ are available for various applications.