Elcometer 130 Salt Contamination Meter: 

The Elcometer 130 Salt Contamination Meter quickly and accurately measures the level of soluble salts on surfaces.

Features:

 v  Fast reading rate allows multiple tests to be completed efficiently

v  Pressure plate ensures a constant and uniform pressure to paper

v  Automatic detection of paper size and automatic adjustment of reading value

v  USB and Bluetooth® data output to ElcoMaster™ 2.0 software

v  Dust and water resistant rugged design equivalent to IP64

v  Automatic temperature compensation ensures accurate results

v  Non-oxidising gold plated contacts ensures lifetime accuracy

v  Stores up to 150,000 readings in 2,500 alpha numeric batches. 

v  Fully portable hand-held, ergonomic design ideal for use in the field.

Elcometer 134A Chloried lon Test Kit for Abrasives:

Chlorides deposited on a surface by contaminated abrasives during blasting can cause a coating to fail prematurely. 

Contamination can build up, particularly if the blast media is recycled several times. Using the Elcometer 134A Chloride Ion Test in the field will accurately identify contamination and prevent costly surface-related failures. 

Elcometer 148 pH Tester

The Elcometer 148 pH Tester is a simple, easy to use instrument measuring both pH and temperature using a single sensor.

pH is the measure of acidity of a liquid. The pH scale ranges from 0 to 14pH - where 0pH is acidic and 14pH is alkaline.

In many industries, pH measurement is critical to the correct performance of processes. pH is temperature dependent thus the temperature of the sample under test will affect the pH value recorded.

The Elcometer 148 pH Tester sensor has automatic temperature compensation, ensuring like-for-like measurements can be taken for meaningful comparison of the results.

Elcometer 138 Bresle Salt Kit: 

It is essential that the level of contaminants on a surface is measured prior to application of the coating to ensure the quality of the coating and that its optimum lifetime is achieved. 

If the coating is applied to a contaminated surface, which is not properly prepared, it could fail prematurely resulting in costly re-coating and high maintenance costs. The Elcometer 138 Bresle Kit includes the Elcometer 138 Conductivity Meter. This lightweight, portable conductivity meter accurately measures the salinity of the test samples. 

The cartridge type sensor can be easily replaced when necessary and displays conductivity (µS/cm and mS/cm) and salinity (%) on the digital display. 

Features of the meter include indication of stability of reading indication. 

 Elcometer 138 Conductivity Meter: 

 The Elcometer 138 Conductivity Meter features:

v  Highly precise measurements can be obtained from a single drop

v  Automatic range switching gives a wide measurement range of 1μs/cm to 19.9mS/cm

v  Out of range and low battery alarms

v  Visual indication when ambient temperature is outside the operating range